a high-performance, two-component, aliphatic acrylic polyurethane finish.

• Good application properties, unlimited recoatable.(can be recoated even after long atmospheric exposure).

• High gloss. Excellent resistance to atmospheric exposure conditions.

• Good color and gloss retention.

• Resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products.

As a top coat in coating systems of Protective: environments, refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures.

The provided data is typical for factory produced products, subject to slight variation depending on colour.

• Previous coat must be dry and free from any contamination.

• Previous coat: surface should be sufficiently roughened if necessary

• Substrate temperature during application at -5°C is acceptable; provided the substrate is free from ice and dry.

• Substrate temperature during application and curing should be at least 3°C above dew point.

• Relative humidity during application and curing should not exceed 85%.

• Spray: Use air spray or airless spray.

• Brush: Recommended for stripe coating and small areas.

• Roller: May be used. Care must be taken to achieve the specified dry film thickness.

X-10 polyurethane thinner.

• The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.

• The effective storage period for base and hardener for 12 months. More than the effective storage period, according to the provisions of product standard items for inspection, if the results meet the requirements, the product can still be used.

• Comply with the relevant national standards and rules for safe operation of painting.

• The applicators and operators shall be trained, experienced and have the capability and equipment to mix/stir and apply the coatings correctly and according to technical documentation.

• Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.

• Please refer to our Safety Data Sheet for details and precautions regarding health and safety.

• Avoid duty statement of this specification to provide information, completely based on the understanding that we get in our laboratory and in practice, the use range of users may go beyond our understanding and control, specific use, please test the product in light of specific conditions, we can not guarantee that the effect of this product in any conditions.

• Changjiang coating for the use of its products or cause (including product quality or negligence) for any loss, damages, only in the product purchase price range, and does not include user or indirectly the collateral damage of parts.

• The above data are subject to change, with the latest specification shall prevail, without notice, unfinished inquiries are welcome.