These sand texture agents are polyamide modified fluoride copolymer which can produce excellent wear resistant matt powder coating. Compared with the competitive products, T-101 can provide good cost, low dosage, good dispersion and gloss stability. T-101 is designed for good cost formulation ， added amount 0.3-0.8%.

• Providing excellent hardness, scratch/friction resistance and smoothness

• Silicon-free, not affect to re-coating.

• Use level range is 0.1-0.3%. To acquire more fine texture, lower gloss powder, add lower dosage of T-101. To acquire more coarse texture, add higher dosage of T-101.

• In combined with organic clay will provide better cost and performance.

• Coarse texture powder will relate to particle size and texture agent dosage.

• Don't add flow agent in the flat grained power coating. Combining silica is better. When produce semi-matt one, please combine with excessive texturing agent, flow agent and small quantity of matt agent (0.5%) in the formulation. Add barium sulfate as the filler.

• Adding 0.2-0.8% very fine talcum powder can remove the problem of edge coverage.

Polyethylene lining, net weight 25KG caveat; stored in a cool and dry place to avoid moisture absorption.In the < 30℃ is valid for two years at room temperature